The use of motion compensation within our solution allows for the possibility of working on the waves. This allows for the safe use of our platform on floating vessels.
Independent of Water Depths
Since the Barge Master solution is applied onto floating vessels instead of Jack-Ups, you can apply a work method which is independent of water depths.
Independent of Seabed Conditions
Since the Barge Master solution is applied onto floating vessels instead of Jack-Ups, you can apply a work method which is independent of seabed and soil conditions.
Motion Compensation
The Barge Master T700 uses motion compensation to hold loads still in significant wave heights of up to 2.5 meters.
Cost Effective Alternative to Jack-ups
The T700 is the perfect alternative for jack-up rigs which are expensive to mobilise, hard to manoeuvre and limited by payload, water depth and soil conditions. The T700 can be installed on your vessel, making it possible to carry out operations from a floating position.
Workability Increase
Dependent on the project, the T700 can provide workability increases of up to 80%. The T700 increases the safety and workability up to significant wave height of 2.5 meters, which leads to significant reduction of project costs, while the project planning can be met.
Proven Technology
The T700 has been used in various different projects over the past 10 years. Our patented motion compensation technology has helped some of the biggest contractors and operators (DEME, Boskalis, SBM, Shell, Equinor) to complete their offshore installation project safely, on time and within budget.
Modular
The T700 is built up of several main modules that allow it to function. Consisting of cylinders, an HPU, and a control room, it is easy to switch one module out and a different module in.
Increased Safety
The T700 guarantees a safety increase in wave heights of up to 2.5 meters, through the use of motion compensation to keep loads still on moving waves.
